Laser Cutting, Tube Laser and Plasma Cutting up to 180 mm
Fiber laser cutting of sheet and plate, 3D tube laser cutting with bevel heads, and CNC plasma cutting of heavy plate up to 180 mm. Cut parts ship as kits or go straight into bending, welding and machining on the same order.
- Trumpf · DurmaFiber lasers
- BLM Group3D tube laser
- 180 mmPlasma plate cutting
- KaltenbachCNC beam line
- DXF · STEPCutting data
Cut Parts and Kits from Your DXF or Drawing
Cutting is where most fabricated parts start. We nest your DXF or drawing for material yield, cut the blanks and either ship them as a cut kit or send them straight into bending, welding and machining. Every blank keeps its heat number, so traceability holds from plate to finished part.
Fiber lasers handle sheet and thinner plate where contour accuracy and clean edges matter. The tube laser cuts round, square and rectangular profiles with 3D and bevel heads, so weld preparation is done during cutting. Heavy plate goes to the CNC plasma table, and structural sections are drilled and cut on the Kaltenbach beam line.
Cutting at a glance
- Fiber laserTrumpf TruLaser · Durma
- Tube laserBLM Group, 3D and bevel
- PlasmaPlate up to 180 mm
- Beam lineKaltenbach, drilling and sawing
- MaterialsMild steel · stainless · aluminium
- Lot sizePrototype to serial
Cutting Equipment
All cutting machines run from DXF, STEP and nesting files.
| Machine | Process | Capability |
|---|---|---|
| Trumpf TruLaser | Fiber laser cutting | Mild steel, stainless steel and aluminium sheet and plate |
| Durma fiber laser | Fiber laser cutting | Mild steel, stainless steel and aluminium sheet and plate |
| BLM Group tube laser | 3D tube and profile cutting | Round, square and rectangular tubes and profiles, bevel cutting for weld preparation |
| CNC plasma table | Plasma cutting | Heavy plate up to 180 mm |
| Kaltenbach beam line | Structural profile processing | Drilling and sawing of I-beams, channels and sections |
What We Cut
Laser-Cut Blanks and Kits
Brackets, gussets, flanges and plates, delivered as kits or welded into assemblies.
Tube and Profile Parts
Tubes and profiles cut to length with holes, slots and bevels in one pass.
Heavy Plate Parts
Thick flanges, rings, segments and base plates cut by plasma, ready for machining.
Cutting in Practice
Questions About Laser and Plasma Cutting
How thick can you cut?
Fiber lasers cut sheet and thinner plate. Heavy plate goes to the CNC plasma table, which cuts up to 180 mm.
Which materials can you laser cut?
Mild steel, stainless steel and aluminium sheet and plate.
Can you cut tubes with bevels?
Yes. The BLM Group tube laser has 3D and bevel heads for round, square and rectangular profiles, so weld preparation is cut in one pass.
Can you deliver cut parts only?
Yes. We deliver cut kits, or the parts go on to bending, welding, machining and coating on the same order.
Which files do you need?
DXF or STEP files plus a drawing with material grade, thickness, quantity and tolerances.
Laser and Plasma Cutting in Türkiye for European Fabrication
Good fabrication starts with an accurate blank. A laser-cut contour that holds its dimensions means the fit-up in the welding fixture is right the first time, and a bevel cut on the tube laser saves a grinding step. That is why cutting at Nika Steelworks is planned with the rest of the part, not as a separate job.
Fiber laser and tube laser
Trumpf TruLaser and Durma fiber lasers cut mild steel, stainless steel and aluminium sheet and plate from DXF and nesting files. The BLM Group tube laser processes round, square and rectangular tubes and profiles with 3D and bevel heads, cutting holes, slots and weld preparation in a single set-up.
Plasma cutting of heavy plate
For thick plate the CNC plasma table cuts up to 180 mm. Typical parts are flanges, rings, ring segments, base plates and gussets for heavy frames, which then go on to CNC machining. Structural sections are drilled and sawn on a Kaltenbach CNC beam line before welding.
One order, from blank to finished part
Cut parts can be bent and rolled, welded to EN 1090 EXC3, machined, painted or galvanized, inspected and packed for export. See examples on our projects page or send your DXF.
Send your DXF or drawing.
Include material, thickness, quantity and whether you need cut parts only or a finished assembly.