Conveyor and Bulk-Handling Components Made to Drawing
Conveyor rollers and pulleys, auger screws, drums, hoppers, chutes and sheaves for material handling, mining, recycling and process plants. Welded, turned and balanced to your drawing in İzmir.
- Ø880 mmAuger screws
- 6,000 mmRoller length
- Ø4,200 mmDrum turning
- HardoxWear liners
- StainlessFood and process
Rotating Parts That Run True
A conveyor is only as good as its rotating parts. Rollers, pulleys, augers and drums must run true under load for thousands of hours. We weld shells and flights, then turn diameters, bearing seats and journals after welding, so run-out stays inside your tolerance.
Static parts such as hoppers, chutes, frames and skirt boards are cut, bent and welded in carbon steel, stainless steel or Hardox. Everything can be painted, galvanized or rubber-lined to specification.
Capacity
- Roller lengthup to 6,000 mm
- Drums and pulleysup to Ø4,200 mm turning
- Auger screwsup to Ø880 × 4,000 mm
- MaterialsCarbon, stainless, Hardox
- FinishingPaint, galvanizing, lining
- Lot sizeOne-off to series
What We Make for Material Handling
Conveyor Rollers and Pulleys
Drive and idler rollers with turned shells and journals, grooved or lagged on request.
Steel rollers →
Auger Screws
Screw conveyors and feeders with continuous or sectional flights and machined shaft ends.
Auger screws →
Drums and Trommels
Rotary drums and screens in carbon or stainless steel, rolled, welded and machined.
Sheaves and Wheels
Rope sheaves and spoked wheels welded and turned on hub, rim and groove.
Hoppers and Chutes
Hoppers, chutes and transfer points with wear liners where the material demands it.
Frames and Supports
Conveyor frames, stringers and support structures, galvanized for outdoor use.
Bulk-Handling Parts in Practice
Questions About Conveyor Components
How long can a roller be?
Up to 6,000 mm on our long-bed lathes. Larger drums and pulleys are turned on vertical lathes up to Ø4,200 mm.
Do you machine after welding?
Yes. Shells and journals are turned after welding so run-out and bearing seats hold the drawing tolerance.
Can you make wear-resistant parts?
Yes. Flights, liners and chutes can be made from Hardox or other wear plate.
Do you make stainless parts for food plants?
Yes. Augers, drums and hoppers can be made in 1.4301 or 1.4404 with TIG welding.
Can you copy a worn part?
Yes. Send the part or its measurements and we reproduce it, or improve it for longer life.
Conveyor Components and Bulk-Handling Equipment from Türkiye
Conveyor builders, plant engineers and maintenance teams buy rollers, augers and drums from us when they need parts made to drawing rather than from a catalogue. Typical buyers build conveyors for mining, cement, recycling, food and agriculture.
Welded, then turned
We roll and weld shells and flights, then turn them on lathes up to 6,000 mm and vertical lathes up to Ø4,200 mm. See our steel rollers, auger screws and large-part machining.
Certified and documented
Every order ships with EN 10204 3.1 certificates, under our ISO 9001 and ISO 3834-2 quality system. Send your drawing or a worn sample.
Send drawings for rollers, augers or drums.
Include dimensions, material, quantity and duty. We reply with feasibility, lead time and price.