Welded Machine Frames, Bases and Housings for OEMs
Machine frames, beds, bases, housings and guards for European machine builders, welded and then machined on datum faces, bores and bolt patterns. Delivered ready to assemble, with 3.1 certificates and dimensional reports.
- 4,500 mmBoring and milling
- CMMMeasured parts
- EN 1090 EXC3ISO 3834-2
- ISO 9001Quality system
- Build to printYour drawing
A Frame That Fits When It Reaches Your Assembly Line
A machine frame carries the guides, motors and gearboxes of your machine. If a mounting face is out of flat or a bore is out of position, assembly stops. We plan welding and machining together: datum faces and machining stock are agreed at the drawing review, the frame is welded in fixtures, and faces, bores and bolt patterns are machined after welding.
Critical dimensions are measured by CMM and reported. Frames leave us painted in your colour, with machined surfaces protected, and packed so they arrive the way they left. See our precision machined fabrications.
Machine frame capability
- Sizeup to 4,500 × 2,500 × 2,000 mm
- Weightup to 12 t
- TolerancesTo drawing, ISO 2768 / ISO 286
- MeasuringCMM measurement
- Stress reliefOn request
- FinishPaint, powder, RAL colour
What We Make for Machine Builders
Machine Frames and Beds
Welded frames and beds milled on guide-rail pads and bored for spindles and drives.
Bases and Base Plates
Heavy bases and plates with machined faces, bores and tapped hole patterns.
Housings
Gear, bearing and drive housings bored and milled on several faces.
Sub-Frames and Brackets
Smaller welded sub-assemblies in series, built in fixtures or on our KUKA robot.
Painted Assemblies
Parts delivered painted in your RAL colour with machined surfaces protected.
Complete Assemblies
Machined parts fitted into assemblies, such as our large rotary mandrel.
See the project →From Your Drawing to a Frame Ready to Assemble
Datum plan
Datums, machining stock and critical features agreed at the drawing review.
Fixture welding
Frames welded in fixtures with a weld sequence that limits distortion.
Check and relieve
Distortion measured; stress relief where the tolerance needs it.
Machine
Faces, bores and patterns machined in as few set-ups as possible.
Measure and report
Critical dimensions measured by CMM and reported.
Paint and protect
Painted in your colour, machined faces protected, crated.
Machine Frames in Practice
Questions from Machine Builders
Which tolerances can you hold on welded frames?
Tolerances follow your drawing. Faces and bores are machined after welding, so flatness and position are set by the machine, not by the weld.
Do you stress-relieve frames?
Yes, when the tolerance or the drawing requires it, before finish machining.
Do you supply measurement reports?
Yes. Critical dimensions are measured by CMM and reported with the parts.
Can you build in series?
Yes. Fixtures and programs are kept per part number for repeat orders.
Can we visit or audit?
Yes. Customer audits and first-article inspections are welcome.
Machine Frame Manufacturing in Türkiye
Machine builders in Germany, Benelux and Scandinavia outsource frames and housings when their own welding or machining is full, or when a part combines heavy fabrication and precision machining. We build to print, from one prototype to repeat series.
Welding and machining planned together
For very large beds see large-part machining.
Documented and delivered
Every order ships with EN 10204 3.1 certificates and dimensional reports, under our ISO 9001 system. Send your drawing.
Send drawings for your machine frames.
Include material, critical tolerances, quantity and colour. We reply with feasibility, lead time and price.