Steel Components for Solar Trackers, Mounting Systems and Energy Equipment
Posts, torque tube parts, brackets, purlins and structural kits for solar trackers and fixed mounting systems, plus enclosures and skids for energy equipment. Made in series, hot-dip galvanized and packed for site.
- SeriesThousands of parts
- EN ISO 1461Hot-dip galvanizing
- EN 1090CE marking
- KitsPacked per site
- Road · seaTo Europe and beyond
Galvanized Steel in Series, on Schedule
Solar projects run on tight schedules and large quantities. We cut, punch, bend and weld tracker and mounting components in series, hot-dip galvanize them to EN ISO 1461 and pack them per site or per row, so installers can work straight from the bundle.
Structural parts are CE-marked under our EN 1090 certification where required. For energy equipment we build generator and compressor enclosures, skids and platforms.
Solar capability
- PartsPosts, brackets, tube parts, purlins
- ProcessesLaser, punch, bend, weld
- CoatingHot-dip galvanizing, duplex
- CertificationEN 1090, ISO 9001
- PackingBundles per site or row
- DeliveryRoad, container
What We Make for Solar and Energy
Tracker Posts and Brackets
Driven-pile posts, bearing brackets and clamps, punched, welded and galvanized.
Solar tracker project →
Torque Tube Parts
End fittings, couplings and drive brackets for single-axis trackers.
Mounting Structures
Fixed-tilt frames, purlins and rafters to your profile list.
Equipment Enclosures
Enclosures for generators, compressors and inverters, painted or galvanized.
Enclosures →
Skids and Platforms
Base skids, platforms and access structures for energy equipment.
Poles and Masts
Flanged poles and masts, welded and galvanized.
Solar and Energy Steel in Practice
Questions from Solar and Energy Customers
Can you produce large solar volumes?
Yes. Tracker and mounting parts are produced in series with fixtures, punching and robotic welding, then galvanized in batches.
Which galvanizing standard do you use?
EN ISO 1461 by default; coating thickness follows the steel thickness unless your specification asks for more.
Can you CE-mark structural parts?
Yes. Under our EN 1090-1 factory production control we issue a declaration of performance where required.
How are parts packed?
In bundles or crates per site, row or part number, labelled to your packing list.
Do you build enclosures?
Yes. Generator, compressor and equipment enclosures with doors, vents and frames.
Solar Tracker and Mounting Steel from Türkiye
Tracker manufacturers and EPC contractors source galvanized steel from Türkiye for short transport times to Europe, the Middle East and Africa, and for reliable series capacity. We have supplied solar tracker components in series, from cutting to galvanized, packed kits.
Galvanized for 25+ years outdoors
Parts are hot-dip galvanized to EN ISO 1461 after fabrication, so cut edges and welds are protected too. Duplex systems are available where colour or extra protection is needed.
Certified and documented
EN 1090 certification, ISO 9001 and 3.1 certificates with every order. Send your profile list with quantities and delivery sites.
Send your profile list or drawings.
Include quantities, coating and delivery sites. We reply with feasibility, lead time and price.